Maintenance and diagnostics
The NK8000 Web Server tool
Configuring logging function on the fly
Note: Resetting the unit restores the original logging configuration saved in
Composer.
9.4 The NK8000 Web Server tool
In addition to the NW8204 tool, the NK8000 Web Server tool provides the NS8210
diagnostic utility with NK82xx branch status information, and also a context
command menu for each NK82xx branch upon selection. It communicates with the
NK82xxs via TCP/IP using either CMSDL or CEI protocol.
Even though the NS8210 appears to function in the same way as the NW8204 tool
to the end user, however, these tools communicate with the NK82xxs differently.
Thus, the NK8000 Web Server tool provides an additional communication layer in
the event of NW8204 communication failure.
Note: The Web Server tool is available for NS8210 only (NS8011 BACnet/IP
driver is not supported).
9.4.1 Working with the NK8000 Web Server
Preparation
To access the NK8000 Web Server application, you need to satisfy the following
software requirements:
⚫ Windows 7, Windows 8.1, Windows Server 2008 R2, or Windows Server 2012
R2.
⚫ Internet Information Services utility installed.
To Next Page
Loading...
