Internet Information Services (IIS) is not pre-installed by default on certain
Windows versions. To install IIS, do the following:
1. Select Start > Control Panel > Programs and Features > Turn Windows
features on or off.
2. Select the Internet Information Services check box.
Note: This utility is already installed if box is checked. If so, skip to
Launching
NK8000 Web Server
.
Adding IIS
3. (Windows Server 2008 R2 and Windows Server 2012 R2 only.) See Table
Installation settings for IIS on Windows Server 2008/2012 R2
for installation
settings.
4. Click OK.
5. (Windows Server 2012 R2 only) When installation is completed, configure the
Web Server:
a. Select Start > Control Panel > Administrative Tools > Internet Information
Services (IIS) Manager.
b. Select [Web Server] > ISAPI and CGI Restrictions.
c. Add the ISAPI extension
C:\Program Files (x86)\DMS8000\Communication
Layer\Nk8210WebServer\Nk8210ServerWeb.dll
and select the Allow extension path to execute check box.
d. Select [Web Server] > Application Pools.
To Next Page
Loading...
