Step by Step
Basic functions
22
Call forwarding
Using variable call forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
The phone is in idle mode Æ page 13.
)1 Enter the code.
1 or 2 or 3 Enter the forwarding type you want:
1=all calls, 2=external calls only, 3=internal calls only.
j Enter the destination number (external destinations
with external code).
Deactivating call forwarding
The phone is in idle mode Æ page 13.
(1 Enter the code.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
To Next Page
Loading...
