Siemens OpenStage 10 T - Forwarding Key

Basic functions
23
Step by Step
Forwarding key
Your service personnel can program the "forwarding"
function on a function key on your OpenStage 10 T. This
forwarding action can be programmed either "complete-
ly" or "incompletely".
Activating forwarding
Prerequisite: Your service personnel programmed the
forwarding key "completely".
S Press the forwarding key. The LED lights up.
The permanently programmed forwarding function is
activated.
or Prerequisite: Your service personnel programmed the
forwarding key "incompletely".
S Press the forwarding key. The LED lights up.
1 or 2 or 3 Enter the forwarding type you want:
1=all calls, 2=external calls only, 3=internal calls only.
j Enter the destination number (external destinations
with external code).
Deactivating call forwarding
R Press the forwarding key. The LED goes out.