Siemens OpenStage 10 T - Answering Calls from the Entrance Telephone; And Opening the Door

Step by Step
Enhanced phone functions
28
Answering calls from the entrance telephone
and opening the door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the en-
trance telephone and to activate a door opener.
If you have the proper authorization (consult your ser-
vice personnel), you can allow visitors to activate the
door opener themselves by entering a five-digit code
(using a DTMF transmitter or installed keypad).
Speaking to visitors via the entrance telephone
Prerequisite: Your telephone rings.
^ Lift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
^ Lift the handset after more than thirty seconds.
j Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone
if available:
S Press the "Door opener" key.
or
S Press the "Consult" key. The LED flashes.
)61 Enter the code.
j Dial the entrance telephone number.
Opening the door with a code (at the door)
j After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.