Enhanced phone functions
37
Step by Step
Conducting a conference
In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
^ Lift the handset.
j Call the first party.
S Press the "Consult" key. The LED flashes.
j Call the second party.
[ Announce the conference.
T Press the "Consult" key.
)3 Enter the code. The LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress.
If the second party does not answer
T Press the "Consult" key and wait two seconds.
or depending on the configuration
T Press the "Consult" twice.
Adding up to five parties to a conference
S Press the "Consult" key. The LED flashes.
j Call the new party.
[ Announce the conference.
T Press the "Consult" key.
)3 Enter the code. The LED goes out.
And so on...
Leaving a conference
\ Replace the handset.
You can only add parties to or remove them from
a conference if you initiated the conference.
To Next Page
Loading...
