Siemens OpenStage 10 T - Talking to Your Colleague with a Speaker Call

Enhanced phone functions
31
Step by Step
Configure a speed-dial key
You can program the keys
0 to 9 with
ten external phone numbers.
The phone is in idle mode Æ page 13.
)92 Enter the code.
) Press the key shown.
j Press the required speed-dial key.
j First enter the external code and then the external sta-
tion number (wait approx. 5 seconds).
Talking to your colleague with a speaker call
You can make a loudspeaker announcement to an inter-
nal user with a system telephone without any action on
their part.
^ Lift the handset.
)80 Enter the code.
j Enter the station number.