Siemens OpenStage 60 - Personal Phonebook - Changing Contact Data; Changing Contact Data

Step by Step
HiPath 8000 functions
100
Temporarily activating anonymous calling for
the next call
If your service personnel activated caller ID transmis-
sion for your phone, you can deactivate this setting for
the next call as follows:
^ Lift the handset.
j Enter the code, for example *68 (contact your service
personnel).
Z Wait until you hear the confirmation tone.
j Dial the phone number of the party you want to contact.
Caller ID transmission is reactivated after this call.
Temporarily deactivating anonymous calling
for the next call
If your service personnel suppressed caller ID transmis-
sion for your phone, you can enable this setting for the
next call as follows:
^ Lift the handset.
j Enter the code, for example *67 (contact your service
personnel).
Z Wait until you hear the confirmation tone.
j Dial the phone number of the party you want to contact.
When you end this call, caller ID transmission is sup-
pressed once again for the next call.