Privacy/security
91
Step by Step
Do not disturb
If "Do not disturb" is activated, your telephone will not
ring. The caller hears the busy signal.
Prerequisite: A programmable sensor key must be as-
signed the function "DND" (Do Not Disturb) Æ page 52.
Activating the "Do not disturb" function
S Press the "Do not disturb" programmable sensor key.
T The programmable sensor key blinks to signal incoming
calls. The caller hears the busy signal. Calls for pickup
groups are however connected.
R To deactivate the "Do not disturb" function, press the lit
programmable sensor key again.
Allowing "Do not disturb"
v Press the key shown until the application’s "Settings"
tab is active.
poss.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
On multi-line telephones Æ page 10 you can only
activate the "Do not disturb" function for your pri-
mary line.
The "Do not disturb" function can also be activat-
ed during a call or deactivated when an incoming
call is being signaled using the programmable
sensor key.
User
Configuration
Incoming calls
Handling
Allow DND
To Next Page
Loading...
