HiPath 8000 functions
105
Step by Step
Using last number dialed
With this function, you can set up a connection within
your area to the last peer dialed.
^ Lift the handset.
j Enter the code (ask your service personnel).
The number is automatically dialed.
or
R Press the "Redial" key.
System checks the status of the station called. If it is
busy, the system will redial the number at regular inter-
vals. The connection is set up when both parties are
free.
Tracing a call
You can have the last incoming call automatically traced.
This is used in particular to identify malicious, bother-
some or troublesome calls.
^ Lift the handset.
j Enter the access code, for example, *57 (ask your ser-
vice personnel).
Z You hear a confirmation tone.
The phone number of the last incoming call is displayed.
Use the "Redial" function to dial additional exter-
nal destinations.
To Next Page
Loading...
