Enhanced phone functions
57
Step by Step
Placing a call on hold
You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
The "Hold" function must be activated by the service
personnel.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connec-
tions’s context menu.
Retrieving a held call:
Select and confirm the option shown in the connec-
tions’s context menu.
Using line keys
On multi-line telephones you can use the line keys to
place ongoing calls on hold.
R To do this, press the corresponding line key. The line key
LED starts flickering. The call is now on hold.
Retrieving a held call:
T Press the corresponding line key. The line key LED
lights up. The call is retrieved.
Hold
Reconnect
The LED display Æ page 17 or status display on
the "Overview" tab Æ page 26 indicates to other
multi-line telephones on which this line is also
configured, that the call is on hold. These phones
can then pick up the call.
To Next Page
Loading...
