Siemens OpenStage 60 - Displaying and Assigning Call Charges; Displaying Call Charges for Current and All Calls

Step by Step
HiPath 8000 functions
108
Marking the last line in the hunt group chain
Sets the "stop hunt" line in the hunt group chain. The
system will stop looking for a free line in the hunt group
chain after it reaches this line.
Activating
^ Lift the handset.
j Enter the code, for example, *97 (contact your service
personnel).
Z Wait until you hear the confirmation tone.
Deactivating
Unmark the line as the end of the hunt group chain.
^ Lift the handset.
j Reenter the code, for example, *97 (contact your ser-
vice personnel).
Z Wait until you hear the confirmation tone.