Siemens OpenStage 80 SIP

Step by Step
Individual phone configuration
208
Lamp brightness for TouchSlider
Adjust the brightness of the TouchSlider  page 21 by
choosing one of the six settings available.
z
You can also configure this setting via the Web interface
 page 271.
v Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Confirm the option shown.
W Set the contrast (freely adjustable).
or
ac Set the contrast in stages.
i Confirm the option shown.
Select and confirm the option shown.
User
Phone
Display
Slider brightness
Save & exit