Basic functions
57
Step by Step
Answering a call with a headset
Prerequisite: A headset is connected.
Answering calls via the headset
The phone rings. The o key flashes.
o Press the key shown.
if nec.
X Set the call volume page 21.
Answering calls automatically via the headset
Prerequisite: The administrator has additionally config-
ured a key with the "Auto-Headset function (AICS Zip
tone) ( page 93).
S Press the "Auto-Headset" sensor key to activate auto-
matic call answering. This key and the headset key illu-
minate.
A short acoustic signal is heard on the headset for a call
and the connection is established.
If you want to manually answer calls again, deactivate
the automatic answering function using the "Auto-
Headset" key. Both keys are off.
Make sure your headset port is set up properly
page 222.
To Next Page
Loading...
