Siemens OpenStage 80 SIP

Step by Step
Basic functions
70
On-hook dialing
The connection is set up with on-hook dialing via the
loudspeaker (speakerphone mode) or via a connected
headset. The line is seized before dialing.
n Press the key shown.
or
o Press the key if a headset is connected.
j Enter the station number.
Press or wait until the dial delay expires
(see  page 120).
or In the pop-up menu:
Confirm the option shown
[1]
.
First enter the number
First enter the number. The loudspeaker or headset key
illuminate when you enter the first digit.
j Enter the station number. Use the TouchGuide
 page 23 to correct entries as necessary.
In the pop-up menu:
Confirm or wait until the dial delay expires
(see  page 120).
The connection is set up.
Repeat dialing S. Hawking
[1] Please note the information in relation to the call journal on
 page 73
Dial
If you are using a dial plan and Immediate dialing
is set (see  page 71), dialing is automatically
performed as soon as the character string en-
tered matches an entry in the dial plan.