Siemens OpenStage 80 SIP

Individual phone configuration
221
Step by Step
Pattern melody
z
You can also configure this setting via the web interface
 page 271.
Prerequisite: You have chosen the "pattern" ringtone,
see  page 220.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select the required pattern melody
[1]
between 1 and 8
(e. g. 4) in the context menu. You will immediately hear
the corresponding Ringer melody. Confirm the selected
Ringer melody.
Select and confirm the option shown.
Pattern sequence
z
You can also configure this setting via the Web interface
 page 271.
Prerequisite: You have chosen the "pattern" ringtone,
see  page 220.
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select
User
Audio
Settings
Ringer melody
4
[1] The phone displays the current setting.
Save & exit
User
Audio
Settings
Ringer tone sequence