Getting to know your OpenStage phone
27
Line utilization
• Private line: A line that is used by a single telephone. This line cannot
be used as a secondary line by another telephone.
• Shared line: A line that is configured on multiple telephones. The line
status (if configured) is displayed in the "Overview" tab for all tele-
phones that share this line. If, for example, a shared line is being used
by a telephone, a status message indicating that this line is busy is dis-
played on all other telephones.
• Direct call line: A line with a direct connection to another telephone.
The line status is indicated by the LED in addition to the display in the
"Overview" tab  page 42.
LED display
LED Explanation
S
Off: The phone is in idle mode.
T
Flashing:
• Incoming call on the line  page 127
• Hold reminder is activated  page 105
Flickering:
• Outgoing call on the line
• The incoming call was prioritized and selected in accor-
dance with the "Automatic line selection for incoming
calls" option
Fast blinking: The line is on "Hold".
Blinking: Call forwarding is activated.
R
Illuminated: The line is busy.
To Next Page
Loading...
Need help?
General