Alphabetical Reference Description of functions
76
LDAP or XML
• Further description ... (DSM)
LDAP server Port
• Can be configured only for the optiPoint 410 standard/advance.
•If an Æ LDAP server is being used, enter the Æ Port number here for
communication with this server.
• Valid values: 1 ... 65535.
• Number editor in optiPoint 410 Æ page 92.
Æ page 28 Æ page 56
LDAP Template Filename
• Can be configured only for the optiPoint 410 standard/advance.
•If an Æ LDAP server is used, enter the name of the LDAP template file
that is used in connection with this server.
• The file must exist in a defined directory on the Æ FTP server
(Æ Download Server Address, Æ FTP Path).
• Standard name Æ page 95.
• Text editor in optiPoint 410 Æ page 93.
Æ page 34 Æ page 58
LED Test
• Conduct this test to check the function of the Æ LED in the
optiPoint 410 zu prüfen.
• All the LEDs blink during the test.
Æ page 40
Line Status
• Activate the display to view the functions and values used to run the
Æ LAN connections in the optiPoint 410.
• Bit rate, activity, half / full duplex, as well as the status of the used net-
work or the manual setting in the optiPoint 410.
• The display takes place through the four Æ LEDs of the left row (for
LAN Port
1
) as well through the top four LEDs of the right row (for PC
Port
1
):
• The status monitor remains active even during the normal operation of
the optiPoint 410. However, it does not affect the operation of the func-
tion keys.
Æ page 43
1. See
Æ
page 10.
Function LEDs on optiPoint 410
Speed 10 Mbit/s 100 Mbit/s -
Activity - not activ activ
Duplex Half-Duplex Full-Duplex -
Status OK not available Error
To Next Page
Loading...
