Making Calls – Convenience Functions
39
Step by Step
Opening the door with a code (at the door):
o
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Activating the door opener:
Press the key. The LED lights up
Select and confirm.
or
qlm
Enter the code.
o
Dial the entrance telephone number.
o
Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press the "OK" dialog
key to change the code.
Select and confirm.
or
You can also open the door without a doorbell ring.
Deactivating the door opener:
Press the key. The LED lights up.
Select and confirm.
or
rlm
Enter the code.
Accepting a Call From an Answering
Machine
You can accept a call from any answering machine if the
machine is connected to your system (contact your ser-
vice personnel) and you have programmed the answer-
ing machine number on a key Æ Page 63.
The LED lights up. Press the key.
*
89=Door opener on?
3=change password?
1=enable with ring?
2=enable w/o ring?
#89=Door opener off?
To Next Page
Loading...
