Workpoint Clients Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-68 HiPath 3000/5000 V9, Service documentation
wclient.fm
optiPoint 410 / optiPoint 410 S and optiPoint 420 / optiPoint 420 S
10.2.3 Connection and Startup
optiPoint 410, optiPoint 420
HiPath 3000 together with HiPath Xpressions Compact supports the central administration of
the IP terminals connected to the system. For this purpose a Deployment Tool (DLS Interface
DLI) has been implemented on the HiPath Xpressions Compact boards. The DHCP and FTP
servers integrated in DLI support the following:
● the central configuration of parameters for all IP terminals connected enabling plug&play
operation
● the central software update of all IP terminals connected
For information about the prerequisites for using the DLI function, see Section 10.3.
For information on terminal administration, refer to the optiPoint 410/420 Administrator Manual.
optiPoint 410 S, optiPoint 420 S
For information on how to connect and start up terminals, refer to the optiPoint 410 S/420 S
Administrator Manual:
The software can be upgraded over:
● the Deployment and Licensing service
Information on the procedure can be found in the Deployment Service Administration Man-
ual.
● the WBM access at the relevant optiPoint IP telephone.
The optiPoint 410 S/420 S Administrator Manual contains information on this procedure.
>
The DLI function can only be used for standalone systems.
The Deployment and Licensing service is available for networked HiPath 3000 sys-
tems with or without HiPath 5000 RSM. The Deployment and Licensing service can
also be used for systems that do not satisfy the prerequisites for using the DLI func-
tion. For information on how to use this tool, see the Deployment Service Adminis-
trator Manual.
To Next Page
Loading...
Need help?
General