Siemens PERFECT HARMONY GENIII/E Series - Page 90

The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-54 A1A19000405A: Version 1.3
s
s
ss
3
Table 3-47: Main Menu (5) Options
An electronic security code is provided to limit unauthorized access to various parameters within the drive
equipment. The default factory settings for parameter security codes are as follows:
Parameter (ID) ID Type Description
Motor Menu 1 Submenu Provides access to the Motor Menu. See Table 3-7.
Drive Menu 2 Submenu Provides access to the Drive Menu. See Table 3-12.
Stability Menu 3 Submenu Provides access to the Stability Menu. See Table 3-22
Auto Menu 4 Submenu Provides access to the Auto Menu. See Table 3-11.
Log Control 6 Submenu Provides access to the Log Control Menu.
Drive Protect Menu 7 Submenu
Provides access to the Drive Protect Menu. See Table 3-
55.
Meter Menu 8 Submenu Provides access to the Meter Menu. See Table 3-58.
Communications Menu 9 Submenu
Provides access to the Communications Menu. See
Table
3-63.
Security Edit Functions
Menu
5000 Submenu
This menu contains functions that are used to edit a
menu item’s security codes. See Table
3-48.
Set Defaults to Current 5045 Submenu
Used to set all default parameters to the current
parameter settings.
Reset to Defaults 5050 Submenu Used to reset all parameters to their factory defaults.
Select Language 5080 Pick List
Sets language for keypad.
• English (default)
•French
•German
• Spanish
Change Security Codes 5090 Function
Used to change the security codes for the various
security levels used by the drive. Default codes are
shown in
Table 3-50.
Enter Security Code 5500 Function
Used to enter the security code to set the clearance level
for access.