Siemens POL638 Series

236 / 244
Siemens Standard application AHU CE1P3977en_02
Building Technologies Appendices 01.02.2010
Start page > Main index > Unit
Setpoints/Settings
-> All settings
->Time switch program
Comfort tmp stpt
Comfort tmp stpt
Economy tmp stpt
Economy tmp stpt
▼
Operating Mode
Actual
Manual operation
->Time switch program
From Bms
-> External control
-> Night kick
-> Night cooling
-> Tmp Start
-> Boost
Power up delay
Fan control
-> Supply fan
-> Exhaust fan
Actual step
Fire mode
Fire setpoint
Slave offset
▼
Temp control
Act controlled tmp
->Tmp setpoints
->Cascade controller
->Min/max ctrlr sply
->Hrec damper
->Heat recovery
->Heating
->Electrical heating
->Cooling
->Heating 2
->El Heating 2
->Cooling 2
->Fan heating
->Fan Cooling
->Fan compensation
Damper control
Off delay by fan off
->Damper
->Fire damper
Loop controllers
-> Supply fan
-> Exhaust fan
-> Air quality
-> Casc controller tmp
-> Min supply tmp
▼
Unit
-> Main overview----------
-> Inputs---------------------
-> Outputs------------------
-> Operating mode-------
-> Setpoints/settings-----
-> Damper control--------
-> Fan control--------------
-> Temp control-----------
-> Humidity control-------
-> Air quality control------
-> Auxiliary------------------
-> Loop controllers--------
-> Operation hours-------
Humidity control
Act controlled hum
->Setpoints
->Cascade controller
->Max controller sply
->Humidifiaction
▼
Operating hours
-> Supply Fan
-> ExhFan
Fan Settings
Hrec (pump) cmd
Heating pump
▼
Main overview
->Act operating mode
->Time switch program
->Outs air tmp
->Outs air hum rell
->Outs air hum abs
->Outs aur enthalpy
▼
Inputs
->Temperatures
->Pressures/flows
->Humidity
->Other
->Digital inputs
->Digital alarms
Outputs
->Digital outputs
->Analog outputs
AirQuality control
->Controller
Function
Setpoint
Auxiliary
->TSP output
->Analog Output
A outp fan step 0
A outp fan step 1
A outp fan step 2
▼
Unit
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 236