Siemens POLYMOBIL III - Table of Contents

Contents 0 - 3
Siemens AG RXB8-115.034.02 Page 3 of 4 POLYMOBIL III
Medical Solutions Rev. 03 04.05 CS PS 24
1 _______Requirements__________________________________________________ 1 - 1
Emphasized texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Required tools and measurement devices . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Safety information and protective measures . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Important start-up information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3
Notes on the protective conductor resistance test . . . . . . . . . . . . . . . . . . . 1 - 4
Notes on device leakage current measurement. . . . . . . . . . . . . . . . . . . . . 1 - 6
Replacement for damaged or lost screws . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 8
2 _______Unpacking ____________________________________________________ 2 - 1
3 _______Checking and adapting the line voltage ____________________________ 3 - 1
Checking the nominal line voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
Adaptation of the nominal line voltage. . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
4 _______Functional checks ______________________________________________ 4 - 1
Checking the control and display elements . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Checking the weight counterbalance . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
Readjustment of the weight counterbalance with affixed accessories . . . . . . . . . 4 - 2
Checking the control elements on the double slot diaphragm. . . . . . . . . . . . . . 4 - 3
Checking the exposure release with high-voltage . . . . . . . . . . . . . . . . . . . . 4 - 3
Checking coincidence of light field and radiation field. . . . . . . . . . . . . . . . . . 4 - 4
Checking the exposure switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
5 _______Final work steps _______________________________________________ 5 - 1
Protective conductor test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
Device leakage current measurement. . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 2
Last work steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2
6 _______Start-up report _________________________________________________ 6 - 1
POLYMOBIL III Start-up report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
7 _______Electrical safety / reports ________________________________________ 7 - 1
Protective conductor resistance / report. . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
Device leakage current / report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 3
8 _______Changes to previous version _____________________________________ 8 - 1
Page