Do you have a question about the Siemens Prisma 3T and is the answer not in the manual?
Magnetic Field Strength | 3 Tesla |
---|---|
Type | MRI Scanner |
Magnet Type | Superconducting |
Slew Rate | 200 T/m/s |
System Type | Whole-body MRI |
Number of Channels | Up to 128 |
Patient Weight Limit | 250 kg |
Bore Diameter | 60 cm |
Software Platform | syngo MR E11 |
Applications | Research |
Imaging Modes | DWI |
Cooling System | Helium-free technology |
Patient Table | Motorized patient table with vertical and horizontal movement |
RF Coils | Variety of coils available for different body regions and applications |
Procedure for performing standby reboots and full system startups of the MRI scanner.
Verifying the status of key system components using the System Manager interface.
Steps to restart the coldhead and reboot the chiller for troubleshooting cooling issues.
Methods for exporting raw MRI data and transferring it using TWIX software.
Standard procedures for cleaning and tidying the MRI scanner and associated equipment.
Actions for squeeze ball alarms, including resetting the scanner table.
Preparing and registering the phantom for the daily stability warmup scan.
Setting up and registering the phantom for ABCD Phantom QA scans and task execution.
Understanding and resolving coil warning messages and protocol issues during scanning.
Handling software glitches like AutoAlign failure and reconstruction errors.
Managing scanner warnings, adjustment aborts, and participant registration errors.
Setting up the button box, trigger, goggles, and visual stimulus controllers.
Setting up Optoacoustics audio system and integrating E-Prime for display.
Setting up ECG, respiratory, and pulse monitoring devices for HCP studies.
Configuring and using FIRMM software for participant motion monitoring.
Setting up and operating the MR camera for participant observation.