Revision Date: 3/13/2019
9
How to Transfer Raw Data Using TWIX Software
1. Enable the advanced user mode (you will need a tech for this step)
2. Click control and click escape key
3. Open the command terminal
4. Type: TWIX - then press enter
5. All raw data will be listed
6. Select the raw data you wish to save by choosing the correct participant ID and sequence
7. Right click on it and choose the top option "copy total raid file"
8. Copy and paste these files into a temp folder on the C drive - typically your group will
have their own temp folder
9. These files can then be copied to a non-dicom folder or flash drive
10. Data needs to be manually deleted from the temp folder and non-dicom folder
To Next Page
Loading...
