Revision Date: 3/13/2019
48
Participant Setup
1. Position your participant
2. Position the mirror so the participant can see the whole LCD screen
3. Landmark the participant and move them into the bore
4. Verify camera positioning
5. If needed, adjust the camera (in the back of the bore) to see the participant’s eyes through
the mirror – this step should not need to be done unless someone has accidentally moved
the camera
6. Turn the room lights to the HCP LCD setting
Camera Cleanup
1. Close VLC
2. Change back to duplicate displays
Right click on the desktop and click Display settings
Under Multiple Displays choose Duplicate these displays
3. Turn off the extended monitor EXT on the desktop switch box
Troubleshooting Tips
1. If the camera will not stream through VLC and you get the below error then:
Unplug and replug the USB cable in the front of the PC desktop – labelled
MREyes
Close VLC and try again
To Next Page
Loading...
Need help?
General
