Revision Date: 3/13/2019
35
Siemens Talk Box Setup
1. You must use the Siemens talk box to talk & listen to your participant if you are using the
Siemens headphones or no headphones
2. You must also make sure that the volume on the scanner’s control panel is turned up so
the participant can hear the task computer
3. Press the “ear” button (#4) to hear the participant
4. This is the sound that comes from bore speaker - you can use this to listen even if you use
the res tech or opto headphones
5. Make sure the sound is turned up
6. Press the “talk” button (#2) to talk to the participant
7. Make sure the sound is turned up
8. For music plug in audio device to the port labelled (#6)
To Next Page
Loading...
