Siemens RDG20 KN Series User Manual

Supported tools
ACS tool
5
A6V11545892_en--_e
153 | 186
The ACS tool supports parameter settings even during normal operation.
To change a control parameter, double-click the parameter in Standard popcard
for the settings.
● Make sure you are logged in with sufficient access right.
● Only control parameters can be changed, not the application!
The ACS tool offers plant diagrams for easy monitoring and operation of the
thermostat.
Parameter settings in
ACS
Notes
Plant diagram in ACS

Siemens RDG20 KN Series Specifications

General

Brand	Siemens
Model	RDG20 KN Series
Category	Thermostat
Language	English