Siemens RUGGEDCOM RMC30 - Communication Ports; Copper Ethernet Ports

To Next Page

To Previous Page

Technical Guidance Notes

Figure 22 – RMC30 Browser Interface –Populated Device Address Table Page

Now the configuration should be complete click Log Out. Connection can be made to the IP address

using the default MODBUS client port number of 502. If you need to change this parameter open the

Configure Protocols branch, see Figure 17 – RMC30 Browser Interface – Serial Protocols Menu,

select MODBUS client and change the IP Port number.

Other manuals for Siemens RUGGEDCOM RMC30