EasyManua.ls Logo

Siemens RUGGEDCOM RS910 - Serial Port Specifications; Copper Serial Port Specifications; Fiber Serial Port Specifications; Operating Environment

Siemens RUGGEDCOM RS910
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4
Technical Specifications
RUGGEDCOM RS910
Installation Guide
24 Serial Port Specifications
Section4.5
Serial Port Specifications
This section details specifications for ports that can be equipped on the RS910.
CONTENTS
Section4.5.1, “Copper Serial Port Specifications”
Section4.5.2, “Fiber Serial Port Specifications”
Section4.5.1
Copper Serial Port Specifications
Baud Rate Connector Isolation
300 to 230 kbps DB9 or RJ45 2.5 kV
Section4.5.2
Fiber Serial Port Specifications
Mode Connector Typical Distance (km)
Optical
Wavelength (nm)
Cable Size
50/125Multimode ST 5 850
62.5/125
Section4.6
Operating Environment
Parameter Range Comments
Ambient Operating Temperature -40 to 85 °C
(-40 to 185 °F)
Measured from a 30 cm (12 in) radius surrounding the center of the
enclosure.
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature -40 to 85 °C
(-40 to 185 °F)

Other manuals for Siemens RUGGEDCOM RS910

Related product manuals