Siemens S7-1500 - Page 15

Product overview
3.2 Components
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
15
Component
Function
Figure
Connecting cable Connecting cables connect the front
connector module with the terminal
modules. Connecting cables are
available in the following versions:
• 16-pin and 50-pin round cable
(shielded or unshielded), pre-
assembled¹
Max. length 10 m
• 16-pin round-sheath ribbon cable
(shielded or unshielded), for
assembly by the user²
Max. length 30 m
• 2 x 16-pin round-sheath ribbon
cable (unshielded), for assembly by
the user²
Max. length 30 m
¹Pre-assembled: One IDC connector (insulation
displacement connector) (flat socket) at each end.
²For assembly by the user. See "Assembling round-sheath
ribbon cables".
Terminal module Digital and analog terminal modules in
S7-1500 design are available for
connecting the I/O signals. These are
attached to the standard mounting rail.
The terminal modules are available in
the following connecting systems:
• Push-in system
• Screw-type terminals
All digital terminal modules also have
LED for channel display.