Wiring SIMATIC TOP connect to the I/O modules
5.1 SIMATIC TOP connect components and selection guide
SIMATIC TOP connect for S7-1500 and ET200MP
34 Manual,
Components of SIMATIC TOP connect system cabling
TPS …for 3-wire connection with LED, digital
and switch in the signal path
- Screw-type terminal
6ES7924-0CH20-0BA0
TPA ...for analog modules, without LED - Screw-type terminals
6ES7924-0CC20-0AA0
TPRi
230 V
Digital, with LED - Screw-type terminals
- Push-in system
6ES7924-0BE20-0BA0
6ES7924-0BE20-0BC0
TPRi
Digital, without LED - Screw-type terminals
6ES7924-0BG20-0BA0
TPRo Digital, with LED - Screw-type terminals
- Push-in system
6ES7924-0BD20-0BA0
6ES7924-0BD20-0BC0
TPOo Digital, with LED - Screw-type terminals
6ES7924-0BF20-0BA0
Pre-assembled round cable
0.5 m 6ES7923-0BA50-0CB0 ...not available
Round-sheath ribbon cable
Round-sheath ribbon cable
16-pin IDC connectors for the round-sheath ribbon cable (x 8) 6ES7921-3BE10-0AA0
Crimping pliers for fitting the 16-pin IDC connectors
20 x 7 mm label, pale turquoise, for fitting to terminal modules
(x 340)
3RT1900-1SB20