Installing your Text Display (TD) Device
2.6 Installing a Faceplate for the TD 100C, TD 200C and TD400C
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
39
4. Carefully lift back the unadhered faceplate and remove the rest of the protective paper
from the TD device.
5. Carefully position the faceplate onto the TD device. Firmly press the faceplate onto the
adhesive, taking care to remove any air bubbles that may have been trapped underneath.
NOTICE
Do not use excessive force when you install the faceplate onto the TD400C device.
If you use excessive force in pressing the faceplate onto the TD400C device, it may
cause damage to the springs under the faceplate.
Ensure that excessive force is not used when you install the faceplate onto the device.
To Next Page
Loading...
