Using the Text Display Wizard to Configure the S7-200 CPU for Your Text Display (TD) Device
4.3 Configuring the Text Display Device
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
77
Loading a Custom Keypad (TD 100C, TD 200C, and TD400C Only)
The TD 100C, TD 200C, and TD400C allow you to create a custom keypad. As described in
Chapter 3, you can insert buttons onto the keypad. The Keypad Designer saves this
configuration to a file (*.td1 for the TD 100C, *.td2 for the TD 200C, and *.td4 for the
TD400C).
To load the keypad configuration file into the Text Display wizard:
● Select the option, Use a custom keypad created with the Keypad Designer. (Find this
check box in the Options area of the Configure Keypad Buttons dialog. See Figure
below.)
● Browse to the keypad configuration file (*.tdx) that you created with the Keypad Designer.
The Text Display wizard loads the keypad configuration file and updates the table of buttons
and the button symbols.
The Text Display wizard lists only those buttons that you had defined with the Set Bit
functionality when you created the buttons with the Keypad Designer.
Figure 4-11 Configuring the Functions for the Buttons (TD 200C)
To Next Page
Loading...
