Connecting SCALANCE S615 to the WAN
1.3 Launching Web Based Management
SCALANCE S615 Getting Started
12 Getting Started, 03/2015, C79000-G8900-C390-01
Launching Web Based Management
In the factory settings, the SCALANCE S615 can be reached at the following IP address:
● IP address: 192.168.1.1
● Subnet mask: 255.255.255.0
In this configuration example, the Admin PC has the following IP address setting to allow it to
access the Web Based Management of the S615.
1. On the Admin PC, open the Control Panel with the menu command "Start" > "Control
Panel".
2. Click "Network and Sharing Center" and select the "Change Adapter Settings" option in
the navigation menu on the left.
3. Right-click on the "LAN Connection" symbol and select the "Properties" menu command.
4. In the "Local Area Connection Properties" dialog, enable the "Internet Protocol Version 4
(TCP/IPv4)" check box.
To Next Page
Loading...
Need help?
General
