Siemens SCALANCE S615 Getting Started

OpenVPN tunnel between SCALANCE S615 and SINEMA RC Server
2.2 Configuring access to the SINEMA RC Serve
SCALANCE S615 Getting Started
Getting Started, 03/2015, C79000-G8900-C390-01
31
2.2.3
Allow access
So that the PC can access the SINEMA RC Server, access from vlan1 to vlan2 is enabled
on the device.
Procedure
1. Click on "Security" > "Firewall" in the navigation area and on the "IP Rules" tab in the
content area.
2. Click "Create". A new entry is created in the table.
3. Configure the firewall rule with the following settings:
Action
Accept
From
vlan1 (internal)
To vlan2 (external)
Source (Range)
0.0.0.0 (all IP addresses)
Destination (Range) 0.0.0.0 (all IP addresses)
Service all
As default, the service is always available
4. Click "Set Values".
Result
Due to this firewall rule, all services between vlan1 and vlan2 are possible without
restrictions, e.g. HTTPS

Siemens SCALANCE S615 Specifications

General

Protocols	IPsec, OpenVPN
Power Supply	24 V DC
Mounting Type	DIN Rail
Product Name	SCALANCE S615
Ports	5
Firewall	Yes
Weight	0.6 kg
Certifications	CE