Siemens SCALANCE S615 - Specifying Device Information

Connecting SCALANCE S615 to the WAN
1.6 Specifying device information
SCALANCE S615 Getting Started
Getting Started, 03/2015, C79000-G8900-C390-01
19
1.6
Specifying device information
To allow better identification of the SCALANCE S615, specify general device information.
Procedure
1. Click "System" > "General" in the navigation panel and on the "Device" tab in the content
area.
2. In "System Name", enter a system name for the device, e.g. "S615-1".
3. Enter the contact person responsible for the device in "System Contact".
4. Enter the identifier for the location at which the device is installed in "System Location",
for example the room number.
5. Click the "Set Values" button.
Result
The general device information for the SCALANCE S615 has been specified.