Siemens SCALANCE S615 - Preface; Purpose of the operating instructions; Documentation on the Internet

SCALANCE S615 Getting Started
Getting Started, 03/2015, C79000-G8900-C390-01
3
Preface
Purpose
The configuration of the SCALANCE S615 is shown based on examples.
IP settings for the examples
Note
The IP settings used in the examples were freely chosen.
In a real network, you would need to adapt these IP settings to avoid possible address
conflicts.
General naming conventions
The designation . . . stands for . . .
SINEMA RC
SINEMA Remote Connect
SINEMA RC Server
SINEMA Remote Connect server
S615
SCALANCE S615
Further Information
Apart from the Configuration Manual you are currently reading, the following documentation
is also available on the topic of Remote Network:
● "Industrial Ethernet Security - SCALANCE S615 Web Based Management" configuration
manual
This document is intended to provide you with the information you require to install,
commission and operate the device. It provides you with the information you require to
configure the devices.
● "Industrial Remote Communication - TeleControl SINEMA Remote Connect Client"
operating instructions
This manual supports you when installing, configuring and operating the application
SINEMA RC Client.
● "Industrial Remote Communication - TeleControl SINEMA Remote Connect Server"
operating instructions
This manual supports you when installing, configuring and operating the application
SINEMA RC Server.