Preface
SCALANCE S615 Getting Started
4 Getting Started, 03/2015, C79000-G8900-C390-01
● Getting Started Industrial Remote Communication - TeleControl - SINEMA Remote
Connect"
Based on examples, this document explains the configuration of SINEMA RC.
● The "SIMATIC NET Industrial Ethernet Network Manual" contains information on other
SIMATIC NET products that you can operate along with the devices of this product line in
an Industrial Ethernet network. There, you will find among other things optical
performance data of the communications partners that you require for the installation.
You will find this document on the Internet under the following entry ID: 27069465
(http://support.automation.siemens.com/WW/view/en/27069465)
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online
Support:
● Using the search function:
Link to Siemens Industry Online Support (http://support.automation.siemens.com/)
Enter the entry ID of the relevant manual as the search item.
● In the navigation panel on the left hand side in the area "Industrial Communication":
Link to the area "Industrial Communication"
(http://support.automation.siemens.com/WW/view/en/10805878/133400)
Go to the required product group and make the following settings:
"Entry list" tab, Entry type "Manuals"
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
● SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
● On the Internet under the following entry ID:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Training, Service & Support
You will find information on Training, Service & Support in the multi--language document
"DC_support_99.pdf" on the data medium supplied with the documentation.
To Next Page
Loading...
Need help?
General
