Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
162
6.3.7 VA mand
D
complete ss poin VAP1...VAP7 if you
configured virtual access points at the higher level Interfaces > WLAN (Virtual
AP count > 0).
On this page, you can a e virtual access points; in other
words, the access poin
S
Enter the SSID of the V
ure that you als in the e
at you assign to
configure sepa ty settings for each virtual access point (see
tion 6.4.1, WBM me N > VAP1...7).
The security settings of the VAPs must meet those of the relevant VLANs.
P Submenu Com
escription
You can only the pages of the virtual acce ts
have
ssign a separate SSID to th
t operates in multiple SSID mode.
SID
LAN here.
Make s
client th
o store the SSID of this VLAN
this VLAN.
configuration of th
Note
You can rate securi
Sec nu Security > Basic WLAN > WLA 1/2
x of the Command Line Interface Synta
CLI\INTER
or for the second wireless adapter (if it exists)
FACES\WLAN1>VAP1>
CLI\INTERFACES\WLAN2>VAP1>
Command Description Comment
vap [E|D]
Enable /disable virtual access point
ssid [network name]
Assigns a network name (SSID).
Operating Instructions SCALANCE W78x
To Next Page
Loading...
