Configuring the IP Address with the Primary Setup Tool
Operating Instructions SCALANCE W78x
51
4.4 In
Procedure
Follow the r:
1. ws Explorer or start the
2. In th
wan
3. The first dialog box of the Installation Wizard opens. Click on the Next button.
ion folder opens. Click on the Next
rimary
log box to
sele
S
5. If the DLC protocol is not installed on your computer, the Information dialog
open OK and install
t
6. ssful. Click on the
After installation of PST V3.1, start the tool with Start > SIMATIC > Primary Setup
Tool.
C79000-G8976-C184-07
stalling the Primary Setup Tool
steps below to install the Primary Setup Tool on your compute
Double-click on the file name setup.exe in the Windo
program using the Windows menu command Start > Run.
e Choose Setup Language dialog box, select the language in which you
t to run the installation.
4. The dialog box for selecting the installat
button if you want to accept the default C:\Program Files\Siemens\P
Setup Tool\. If you want to use a different folder, you can open a dia
ct the folder by clicking the Browse button.
tart the installation by clicking the Next button.
s referring you to the ReadMe file. Confirm the dialog with
he DLC protocol later as described in the ReadMe file.
A final dialog box informs you that the installation was succe
Finish button to close this dialog box.
To Next Page
Loading...
