Configuring the IP Address with the Primary Setup Tool
Operating Instructions SCALANCE W78x
52
ary Setup Tool
Selecting t
After a elect the
langu >
Lang
Selecting the Network Adapter
If there is more than one network adapter in your computer, you can open the
Settings > Network Adapter menu and specify which adapter is used by the
Primary Setup Tool. This menu displays a maximum of four network adapters.
Browsing the Network
Before you assign IP addresses with the PST, you must first locate the
w:
● Select the Network > Browse menu command.
e F5 key.
ne.
C79000-G8976-C184-07
4.5 Working with the Prim
he Language
st rting the Primary Setup Tool, a dialog opens in which you s
age for the program. You can also set the language in the Settings
uage menu.
configurable devices in the network. Start this search with the steps outlined belo
● Press th
● Click on the magnifier icon in the toolbar below the menu bar.
While the Primary Setup Tool browses the network, the Browse Network dialog is
displayed with a progress bar. On completion of the search, the Primary Setup Tool
displays a list with all the devices it has found in the left-hand pa
To Next Page
Loading...
