Siemens SCALANCE W788-1PRO - RADIUS Server Menu Command

Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
178
RADIUS Server Menu Command
menu command is available only when you use the SCALANCE
ecify the mode in the System menu.
6.4.4
Note
The RADIUS
W78x in access point mode. You can sp
Authentication over an External Server
erver. A client can
n data of
uthentication
SCALANCE W supports the external authentication mechanisms EAP-TLS, EAP-
TTLS and PEAP.
yntax of the Command Line Interface
The concept of RADIUS is based on an external authentication s
only access the network after the SCALANCE W78x has verified the logo
the client with the authentication server. Both the client and the a
server must support the EAP protocol (Extensive Authentication Protocol). The
S
CLI\SECUR
Description Comment
ITY\RADIUS>
Command
server [IP a ]
Specifies the IP address of the
ddress
primary RADIUS server.
server B [IP
backup RADIUS server.
address]
Specifies the IP address of the
port [port]
Specifies the port of the primary
RADIUS server.
port B [port]
Specifies the port of the backup
RADIUS server.
Secret [password]
Specifies the password for the
primary RADIUS server.
secret B [password]
Specifies the password for the
backup RADIUS server.
maxreq [max. number]
Maximum number of queries to the
RADIUS server.
maxreq B [max. number]
Maximum number of queries to the
RADIUS server. (backup server)
authprd [time in s]
Period for repeating authentication. The default is 3600 s.
Operating Instructions SCALANCE W78x