Configuration Using the Wizards of Web Based Management
Operating Instructions SCALANCE W78x
74
Description
This page displays the parameters you have selected when you have completed all
de and
essary settings using
the iPCF Wizard link.
5.4.8 Finish
the entries for the basic configuration. The setting Adopt MAC Address and the
note on the iPCF Wizard is displayed only in client mode.
If you use a SCALANCE W788-1RR or SCALANCE W788-2RR in client mo
want to operate it in a iPCF network, you can enter the nec
Finish button
Click this button to close the Basic Wizard and to log on again with the modified IP
address. Alternatively, click on the Security Wizard link to change to the security
settings.
C79000-G8976-C184-07
To Next Page
Loading...
