Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
206
l Address
T
• PST over the Ethernet interface:
s changed.
● Loca
Here, you enter the local address of the Ethernet device.
● Local Port
Here, you enter the number of the local port of the Ethernet device.
Note
The following instructions apply only to the IP parameter assignment using the PS
tool.
When the module is accessed with PST by a configuration computer, the address
assignment differs depending on the interface:
• PST over the wireless interface:
The global address is changed.
The local address i
Operating Instructions SCALANCE W78x
To Next Page
Loading...
