Siemens SCALANCE W788-1PRO - Page 218

Configuration Using Web Based Management and the Command Line Interface
C79000-G8976-C184-07
218
Syntax of the Command Line Interface
CLI\IFEATURES\IPCF\WLAN1>
or for the second wireless adapter (if it exists)
CLI\IFEATU
Command Description Comment
RES\IPCF\WLAN2>
ipcf [E|D]
Enables or disables iPCF mode.
pnio [E|D]
Enables or disables optimized PNIO
support.
Only on SCALANCE
W788-xRR models
(access point).
update [tim
Specifies th time for Only on
788-xRR models
ccess point).
e]
e PNIO update
cyclic PNIO data exchange. This
value must match the configured
PNIO cycle time.
SCALANCE
W
(a
Operating Instructions SCALANCE W78x