Configuring the IP Address with the Primary Setup Tool
Operating Instructions SCALANCE W78x
48
The Primary Setup Tool uses the DLC protocol for communication with the
s. Depending on the operating system you are using, you must work
h the following steps before you can use the DLC protocol:
Note
vers
C79000-G8976-C184-07
DLC Protocol
module
throug
● Windows XP Professional
The DLC protocol is not supplied with Windows XP and must be installed and
activated separately.
● Windows 2000 Professional SP2
The DLC protocol is supplied with Windows 2000 but must be added to the
active protocols.
The sections on installing the DLC protocol are relevant only for older firmware
ions < V2.3.
To Next Page
Loading...
