Introduction
SICAM RTUs, SICAM MIC System Description 13
MC6-054-2.00, Edition 07.2014
Total application, fully flexible
· Thanks to its node functionality, the SICAM MIC has many different potential applications,
for example as an ordinary telecontrol substation with any kind of communication to a con-
trol center.
· If SICAM MIC does not offer adequate signal scope, additional SICAM MIC systems can
be readily connected.
· Freely programmable application programs for local control functions complete the all-
round versatility of the SICAM MIC.
· The SICAM MIC can be used optionally in multipoint or dial-up traffic, but also over
LAN/WAN networks. Transmission conforms to IEC 60870-5-101 or IEC 60870-5-104.
Good connections to the control center
· Multipoint traffic
External data transmission equipment can be connected via the V.28 interface.
· Dial-up traffic
A wide range of connection-oriented transmission media (analog, ISDN, GSM, TETRA) is
supported as standard.
· LAN/WAN
IEC 60870-5-104-compliant transmission based on Ethernet TCP/IP is used for communi-
cation.
To Next Page
Loading...
