System Overview
SICAM RTUs, SICAM MIC System Description 23
MC6-054-2.00, Edition 07.2014
2.3.3.1 I/O Modules
The optional I/O modules support the peripheral element with the process data input and out-
put.
The connection of the process signals (I/Os) happens by
means of removable screw terminals. The screw termi-
nals are enclosed with each I/O module.
When modules are exchanged no connections need to
be detached, since the screw terminals carry the wiring.
Thereby the assembly effort required for the connection is
reduced to a minimum.
Further, a status display resides on the I/O modules.
Features
· Installation on DIN rail
· Acquisition of process signals and preprocessing by means of hardware
─ binary inputs
─ analog inputs (currents, voltages, temperatures)
· Output of process signals and postprocessing by means of hardware
─ binary outputs
─ analog outputs (currents and voltages)
· Status display for binary signals
· Function display via LED
Product Overview
Type Designation Power
DI-6100 Binary input 2x8, 24…60 VDC 170 mW
DI-6101 Binary input 2x8, 110/220 VDC 170 mW
DI-6102 Binary input 2x8, 24…60 VDC 1 ms 170 mW
DI-6103 Binary input 2x8, 110/220 VDC 1 ms 170 mW
DI-6104 Binary input 2x8, 220 VDC 170 mW
DO-6200 Binary output transistor 2x8, 24…60 VDC 600 mW
DO-6212 Binary output relays 8x 24…220 VDC/230 VAC 800 mW
DO-6220 Checked command output base module 560 mW
DO-6221 Checked command output base module measurement 1.38 W
DO-6230 Checked command output relay module 130 mW
AI-6300 Analog Input 2x2 ±20 mA/±10 V 480 mW
AI-6307 Analog Input 2x2 ±2.5 mA/±5 mA 480 mW
AI-6308 Analog Input 2x2 ±1 mA/±2 mA/±10 V 480 m'W
AI-6310 Analog Input 2x2 Pt100/Ni100 480 mW
AO-6380 Analog Output 4x ±20 mA/±10 mA/±10 V 1.9 W
TE-6420 Speed Measurement 2x2 5 VDC/24 VDC/NAMUR 790 mW
To Next Page
Loading...
