Siemens SICAM MIC - DI-6102, DI-6103

System Components and Technical Data
SICAM RTUs, SICAM MIC System Description 57
MC6-054-2.00, Edition 07.2014
5.4.1.2 DI-6102, DI-6103
· Single-point information
─ Acquisition with a resolution of 1 ms
t
─ Update every 10 ms
a
(in the cycle of the open-/closed-loop control function, if larger)
─ Revision
ta
─ Power monitoring
ta
─ Inversion
ta
─ Firmware filter
t
─ Bounce suppression
t
─ Determination of the cause of transmission
t
─ Spontaneous transmission of changes
t
─ Periodical transmission
a
· Double-point information
─ Acquisition with a resolution of 1 ms
t
─ Update every 10 ms
a
(in the cycle of the open-/closed-loop control function, if larger)
─ Revision
ta
─ Power monitoring
ta
─ Inversion
ta
─ Firmware filter
t
─ Bounce suppression
t
─ Monitoring intermediate and faulty positions
t
─ Determination of the cause of transmission
t
─ Reporting switching operations in progress
t
─ Breaker tripping detection
t
─ Breaker tripping suppression during auto-reclose
t
─ Spontaneous transmission of changes
t
─ Periodical transmission
a
· Integrated totals via count pulses
t1
─ Acquisition by firmware with a maximum count frequency of 20 Hz
− Pulse length/pause >2 ms/>2 ms
− Revision
− Power monitoring
− Inversion
− Pulse counting
─ Counter value formation
− Count pulse evaluation
− Set counter
─ Formation of integrated totals
− Counter request
− Interval control
− Frozen absolute value
− Frozen relative value
─ Not power-fail safe
─ Integrated total transmission according to IEC 60870-5-101
─ Spontaneous transmission